Sper-scientific 840002 Anemometer Hotwire CFM Datalogger Bedienungsanleitung PDF herunterladen (Seite 7)

- 7 -

a. Auto Data Logger (sampling time can be set for 2 seconds to

8 hours, 59 minutes, 59 seconds):

• Press the LOGGER (8) button once, "REC DATA" is displayed and

"Recording. . . ." flashes at each preset interval.

• Press the LOGGER (8) button again to exit. "REC" is still displayed,

but "DATA" is no longer shown.

• To resume data logging, simply press the LOGGER button (8) again.

• To exit the "REC" function, press and hold the REC button (4) for at

least 2 seconds.

b. Manual Data Logger (sampling time MUST be set to "0" zero):

• Press the LOGGER (8) button once to save each data point.

• To exit this function, press and hold the REC button (4) for at

least 2 seconds.

4. ADVANCED AJUSTMENT PROCEDURES

Press the SET button (8) for at least two seconds to enter the advanced

adjustment procedures. Press the ESC (3) button to exit.

4-A. Check Remaining Available of Data Points

Press the SET button (8) at least 2 seconds until the lower display shows:

"XXXXX" is the number of free data points.

4-B. Clear Memory

• Press the SET (8) button as needed to reach the

"clear memory" screen. The number of saved data

points is displayed.

• To delete saved data from memory, press the ENTER (4) button once,

then press ENTER (4) button again to confirm your action. The display

shows: "0 Ok ESC:Quit".

• If you DO NOT want to clear the memory, press the ESC (3) button to exit,

or press the SET (8) button to advance to the next option.

4-C. Date/Time Setting

• Press the SET button (8) as needed to reach

the "date/time set" screen.

• Use the ▲UP (5), ▼ DOWN (6), and ENTER (4) buttons to select the

06:01:03 Date/Time Set

y-m-d ^, v ENTER(→)

XXXXX Memory Space

Before executing the advanced adjustment procedures,

exit the HOLD and RECORD functions.

Clear Memory

Esc:N Enter:Y

107

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Sper-scientific 840002 Anemometer Hotwire CFM Datalogger Bedienungsanleitung Seite 7