Sper-scientific 840099 Datalogging Manometer Bedienungsanleitung PDF herunterladen (Seite 14)

AUTO POWER OFF

To prolong battery life, the meter will turn off automatically if

no buttons are pressed for your preset (1~20 minutes). To

edit or disable this feature, press F4 (SET) to access the

setup mode, then use the F2 (EDIT), ▲ or ▼ buttons and

Keypad to make changes.

Clear Auto Log Data

1. Press F3 (LOG) to enter log mode.

2. Press F3 (SET) to enter auto log parameter set-up.

3. Press F4 (NEXT) to access the clear option.

4. Press F2 (CLR) for two (2) seconds and the “Clear All?”

message is displayed.

5. Press F2 (YES) to clear all auto log data, or F3 (NO) to

cancel clear function.

6. After clearing all auto log data, press F4 (BACK) to re-

turn to auto log parameter set-up.

7. Press F1 (EXIT) to return to the Welcome display.

MEASUREMENT PROCEDURES

ERROR CODES

 E2: The value is under-range

 E3: The value is over-range

 E4: Error reading sample

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Sper-scientific 840099 Datalogging Manometer Bedienungsanleitung Seite 14