Sper-scientific 850055 pH Meter - Advanced Bedienungsanleitung PDF herunterladen (Seite 23)

MEASUREMENT PROCEDURES

Note...

There is no need to take temperature compensation into

consideration when using an ORP probe to measure.

Temperature Compensation

Automatic with pH probe (ATC):

Plug the temperature sensor connector into the jack on top

of the meter next to the larger BNC connector.

Manual with pH probe (MTC):

1. To set the temperature, press MN/MX/AV for more than

2 seconds, “CA” will flash on the LCD Display.

2. Press the ▲ or ▼ to change the temperature value and

then press MN/MX/AV to save and return to Normal

Mode.

Hold Function

This function allows you to freeze the current reading on the

display in Normal Mode.

1. Press HLD in Normal Mode. “HLD” appears on the

display.

2. Press HLD and the meter returns to Normal Mode.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Keine Kommentare

Sper-scientific 850055 pH Meter - Advanced Bedienungsanleitung Seite 23