Sper-scientific LUCL-2006 Chlorine Meter Bedienungsanleitung PDF herunterladen (Seite 10)

6)Wait one minute approximately,

then insert the " Testing bottle " to the bottom of

" Container " ( 3-2, Fig. 1 ) completely.

Before the measurement, it should envelop in the

" Cover " ( 3-1, Fig. 1 ) completely.

7)Press " Test Button " ( 3-5, Fig. 1 ) once, the display

will show the text " tESt " ( TEST )" with flashing,

wait approx. 10 seconds, the Display will show

the measurement value.

Wash ( Reins ) the Testing bottle

* After the testing, it should wash ( reins )

the Testing Bottle by the Distill Water

4-3 Free/Total Chlorine mode selection

1)Meter is under the power off conditions.

Press " Hold Button " ( 3-4, Fig. 1 ) " REC Button " (

3-8, Fig. 1 ) at the same time ( not release ), then

press the " Power Button " ( 3-6, Fig. 1 ) will enter the

selection mode to select the function of " Free

Chlorine " or the " Total Chlorine ".

2)Press the " TEST Button " ( 3-5, Fig. 1 ) to select the

desiring function ( Free Chlorine or Total Chlorine ),

then " REC Button " to confirm and save the selection

mode into the memory.

Remark :

* For the swinging pool application, typical to

select the " Free Chlorine " function.

* For the industrial water pollution application, typical

to select the " Total Chlorine " function.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Sper-scientific LUCL-2006 Chlorine Meter Bedienungsanleitung Seite 10